Create a free account to get started

Unlock full course notes by signing up

  • Video lessons taught by top educators
  • Practice questions with guided solutions
  • Written review notes for reference
  • Expert answers anytime from course tutors

Static Equilibrium


A system is in a static equilibrium if it has both translational and rotational equilibrium (It does not move and it does not rotate!)


  • Newton’s Second Law says that if a body is at rest, or moving at a constant velocity, the sum of all forces on it must be zero. This is known as translational equilibrium:

∑Fx=0\sum F_x=0


∑Fy=0\sum F_y=0


∑Fz=0\sum F_z=0



  • Similarly, if an object is at rest and has no angular motion (is not rotating), the sum of all of the torques acting on it must be zero. This known as rotational equilibrium:

∑τx=0\sum \tau_x=0


∑τy=0\sum \tau_y=0


∑τz=0\sum \tau_z=0






Create a free account to get started

Unlock full course notes by signing up

  • Video lessons taught by top educators
  • Practice questions with guided solutions
  • Written review notes for reference
  • Expert answers anytime from course tutors

Example: Ladder at Equilibrium


A 3.0 m ladder of mass 12 kg rests against a frictionless wall. The coefficient of friction between the ladder and the floor is 0.60. What is the smallest angle that the ladder can make with the ground if the ladder is to remain at rest?

Image illustrating Example: Static Equilibrium of a Ladder


Solution:


First we start with identifying forces and the location at which they are applied on the ladder in FBD:



Image illustrating Example: Static Equilibrium of a Ladder


l=3 ml = 3\text{ m}


m=12 kgm=12\text{ kg}


μs=0.6\mu_s = 0.6


We choose the maximum of the static friction because we are looking for the smallest angle.


fsmax=μsNf_s^{max}=\mu_s N


The ladder is stationary, thus we have static equilibrium.



∑Fx=0N1−fs=0⇒N1=fsmax=μsN=μsmg\sum {F_x}=0\quad{N_1}-{f_s}=0\Rightarrow N_1=f_s^{max}=\mu_s N=\mu_s mg


∑Fy=0N−mg=0⇒N=mg\sum {F_y}=0\quad{N}-{mg}=0\Rightarrow N=mg


For torques, we choose the center of rotation to be at the bottom of the ladder, thus the torques produced by N and friction force are zero.


∑τ=0  →  τN1+τmg+τN+τfs=0\sum {\tau}=0\ \ \rightarrow \ \ {\tau_{N1}}+{\tau_{mg}}+{\tau_N}+{\tau_fs}=0


τN1=−r1(μmg)sin⁡θ=−l(μmg)sin⁡θ\tau_{N1}=-r_1(\mu mg)\sin\theta=-l(\mu mg)\sin\theta


where as usual I chose clockwise torques to be negative and counter-clockwise torques to be positive.


τmg=r2(mg)sin⁡(90−θ)\tau_{mg}=r_2(mg)\sin(90-\theta)

Putting sum of all torques equal to zero we get:


−l(μmg)sin⁡θ+l2(mg)cosθ=0-l(\mu mg)\sin\theta+\dfrac{l}{2}(mg)cos\theta=0


where in the last step I used a trigonometric identity thatsin⁡(90−θ)\sin(90-\theta)is equal to cos⁡θ\cos\theta.


From the above equation, we can solve for tan⁡θ\tan\theta:


tanθ=sin⁡θcos⁡θ=12μ=12(0.6)tan\theta=\dfrac{\sin\theta}{\cos\theta}=\dfrac{1}{2\mu}=\dfrac{1}{2(0.6)}


θ=40°\theta=40\degree


A horizontal beam with a length of 8 meters and weight of 200 N is attached to a wall by a pin connection. Its far end is attached to the cable that makes angle of 53 degrees with the beam. A person of weight 600 N stands 2 meters away from the wall. What is the tension of the cable (T) and the magnitude of the force that wall applies on the beam (R), respectively? (Assume the force from the wall has both horizontal and vertical components.

Illustration for practice question: Forces: A person standing on a beam



Choose an answer

Create a free account to get started

Unlock full course notes by signing up

  • Video lessons taught by top educators
  • Practice questions with guided solutions
  • Written review notes for reference
  • Expert answers anytime from course tutors