
Buoyancy
Buoyant force is an upward force exerted on an object either partially submerged or completely submerged in a fluid due to pressure differences between top and bottom of the object.
Archimedes's Principle
Archimedes' principle says that the amount of buoyant force equals to the weight of the liquid that the object displaces while floating/sinking.
Hence, buoyant force has the following equation:
- ρf is the density of fluid
- Vsub is the submerged volume of the object
- g is the gravitational acceleration
Usually there is a competition between buoyant force and gravity. At static equilibrium condition when the object doesn't move, the net force on the object is zero. So:
- Whereρois the density of the object and Vois the volume of the object


Example: Hanging Boxes in Water
Boxes A, B and C have the same size. A and C are located at the same level but B is deeper in water. If mA>mB>mC, compare:
a) Buoyant force
b) Force exerted by the water on top of each box
c) Tension in the rope
d) Apparent weight

Part a)
The buoyant force is always:
B=ρfluid Vsub g
All blocks have the same size and therefore the same Vsub, which means that the buoyant forces are all equal:
BA=BB=BC
Part b)
The force exerted by the water on top of each box is due to the pressure of the column of water:
F=ρwatergh
Therefore we have:
FB>FA=FC because hB>hA=hC
Part c)
To find tension, we need to look at the free body diagram of each box.
For each box we have:
∑F=ma
B+T−mg=0
T=mg−B
We know that B is the same for all boxes (from part a).
Therefore we have:
TA>TB>TC because mA>mB>mC
Part d)
The apparent weight is the real weight minus the Buoyant force:
W=mg−B
Again, we know that B is the same for all boxes (from part a).
Therefore we have:
WA>WB>WC because mA>mB>mC
Example: Wooden Cylinder Floating in Oil and Water
A cylindrical block of wood 3.50 cm high is submerged partly in water and partly in oil. It is submerged so that the flat circular face is facing vertically upwards, and completely covered by the oil. Oil, with a density of 930 kg/m3 floats on water. The density of wood is 960 kg/m3. At what position from the bottom of the block is the water-oil interface?
Let's draw the free body diagram for the cylinder:

At equilibrium, the net force on the cylinder should be zero:
∑F=ma
FB water+FB oil−mg=0
ρwaterVin waterg+ρoilVin oilg=mwoodg
Let's define the fraction of the volume in water as:
fw=fraction in water=VtotVin water → Vin water=fwVtot
and the fraction of the volume in oil as:
fo=fraction in oil=VtotVin oil → Vin oil=foVtot
Substituting these in, and using mwood=ρwoodVtot , the force equation becomes:
ρwaterVin water+ρoilVin oil=mwood
ρwaterfwVtot+ρoilfoVtot=ρwoodVtot
ρwaterfw+ρoilfo=ρwood
Now, the fractions submerged in oil and water should add up to one, that is fo+fw=1.
This means that fo=1−fw and our equation becomes:
ρwaterfw+ρoil(1−fw)=ρwood
Let's solve for the fraction in water:
ρwaterfw+ρoil−ρoilfw=ρwood
fw(ρwater−ρoil)=ρwood−ρoil
fw=ρwater−ρoilρwood−ρoil
Put the numbers in:
=1000−930960−930=0.43=43%
Therefore the height in water is 43% of the total height:
h=0.43×3.5=1.5 (cm)