Create a free account to get started

Unlock full course notes by signing up

  • Video lessons taught by top educators
  • Practice questions with guided solutions
  • Written review notes for reference
  • Expert answers anytime from course tutors

Rotational Work and Torque


When we apply a torque to an object, we are performing work. The object is moving in angular variables rather than translational. So the work done by a torque caused by a force which is along the angular displacement is:


W =τ(θf−θi)\boxed{W\ =\tau (\theta_f-\theta_i)}

Written as an integral:

W=∫τ⃗.dθ⃗\boxed{W = \int{\vec{\tau}.d\vec{\theta}}}
















Work-Energy Theorem for Rotational Motion

Work-kinetic energy theorem for rotational motion:

W=12Iωf2−12Iωi2\boxed{W=\frac{1}{2}I\omega_f^2-\frac{1}{2}I\omega_i^2}




Create a free account to get started

Unlock full course notes by signing up

  • Video lessons taught by top educators
  • Practice questions with guided solutions
  • Written review notes for reference
  • Expert answers anytime from course tutors

Example: Rotating Wheel Kinetic Energy


A wheel whose rotational inertia is 10 kg.m2 starts from rest and accelerates under a constant torque of 3.0 N.m for 8.0 seconds. What is the wheel's rotational kinetic energy at the end of the 8 seconds?


Solution:

Here are the information given to us:

I=5kgm2  ωi=0τ=3Nm I = 5kgm^2 \ \ \newline \omega_i=0 \newline \tau = 3Nm

Since the wheel starts at rest, its initial kinetic energy is zero. So, we can use work-energy theorem to find change in the kinetic energy of the wheel which is its final rotational kinetic energy in this case.


W=Kf−KiW=K_f-K_i

We can find work by knowing the torque acting on the wheel using:

W=τΔθW=\tau \Delta\theta

So, we need to first find Δθ\Delta\thetausing rotational kinematic equations.


τ=Iα\tau = I\alpha

α=τI=310  rad/s2\alpha = \dfrac{\tau}{I} =\dfrac{3}{10} \ \ rad/s^2

Δθ=12αt2+ωit=1231082+0=9.6  rad\Delta\theta=\frac{1}{2}\alpha t^2+\omega_it=\frac{1}{2}\frac{3}{10}8^2+0=9.6 \ \ rad


Thus: W=Kf−0=3(9.6)=28.8  jW=K_f-0=3 (9.6)=28.8 \ \ j


So, the rotational kinetic energy after 8s is 28.8 j28.8 \ j.

A thin rod with mass of M and length of L is hinged to the wall at one end. The rod is held horizontally and then released. What is the speed of the tip of the rod as it hits the wall? Assume the hinge is frictionless. The axis of rotation for a thin rod about one of its ends is 13ML2\frac{1}{3}ML^2.


Hint: You should take the CM into consideration for problems of this kind.

Create a free account to get started

Unlock full course notes by signing up

  • Video lessons taught by top educators
  • Practice questions with guided solutions
  • Written review notes for reference
  • Expert answers anytime from course tutors

This is a classic problem - professors love to ask questions about it!


Consider any round thing you can think of rolling down a hill. Here, we will use four objects: a ring (I=MR2I=MR^2), a disk (I=12MR2I=\frac12MR^2), a solid sphere (I=25MR2I=\frac25MR^2), and a hollow sphere (I=23MR2I=\frac23MR^2).


You release them from rest at the same time from height h and they all roll without slipping (that is, there is enough static friction to allow for this). The angle of the incline is θ\theta.


The static friction for this case is f=mgsin⁡θ1+mR2If=\frac{mg\sin\theta}{1+\frac{mR^2}{I}}.







a) Which one gets to the bottom of the slope first? In what order do the four objects finish?

Choose an answer

Create a free account to get started

Unlock full course notes by signing up

  • Video lessons taught by top educators
  • Practice questions with guided solutions
  • Written review notes for reference
  • Expert answers anytime from course tutors

Extra Practice